Installation of air conditioning systems

Installation of air conditioning systems from Alter Air
Own trained installation teams
Professional installation tools
Full compliance with the developed project
Coordination with related specialists

​Only professional installation of air conditioning!

If you want the room to always have a comfortable microclimate and clean air, you just need to take care of the air conditioning system. In order for this system to work smoothly and reliably for a long period of time, it is necessary to entrust its organization to qualified specialists, because the process of its creation is rather complicated and multi-stage. Alter Air company, in addition to selling a variety of climatic and other equipment, is also professionally engaged in its design and installation. This section provides extensive information that will help you understand how different types of split systems are installed.

Types of installation work

Installing a wall-mounted air conditioner

A wall-mounted air conditioner is a household device that is used for cool rooms, usually no more than 100 sq. meters (maybe more). Most often these are:

  •     apartments,
  •     the shops,
  •     separate rooms in offices,​
  •     cottages.

The models will provide a rapid drop in temperature to the specified values, without overheating and without losing performance. Each model of the air conditioner has its own capacity, which is marked on the case and indicated in the technical passport. Therefore, it is not difficult to choose air conditioners for all rooms in the room.

Installation of a wall-type split system provides the installation of a separate outdoor and indoor unit. When installing the outdoor unit, brackets, a special stand, a mounting frame or other static structure are used. The external and internal units are interconnected by a freon line, which consists of copper pipes. Installation of indoor units is carried out in accordance with the wishes of the placement of the customer.

Installation of a duct air conditioner

The duct air conditioner is installed behind a hem or hemmed ceiling, its installation is hidden. Thanks to their design, they can cool several rooms at the same time. The power of duct-type air conditioners is approximately 12 to 25 kW, which is enough to cool a small office, cottage or 4–5 room apartment.

Thus, the use of one duct-type air conditioner allows partly to solve the problems of both ventilation and air conditioning of an entire office, apartment, cottage and other premises. It is only necessary to take care of the correct calculation of air exchange, selection of the air conditioner according to the cooling capacity and static pressure, provide for the installation of an electric or water heater for heating the outside air in winter.

Installation of a duct air conditioner is quite difficult to implement, since more work is required. As a result, such equipment is completely hidden behind a hemmed ceiling, in a technical attic, etc. Only air distribution grilles give their presence.

Installation of cassette air conditioner

For installation of cassette air conditioners, a suspended ceiling or simply high ceilings are required. If such conditions are not provided, then you should opt for other types of air conditioners. These devices distribute air well throughout the room thanks to the 4-way air supply.

Installation of a floor-ceiling air conditioner

If we talk about the installation of floor-ceiling air conditioners, then the main feature is the ability to install them both on the ceiling and on the wall.

Installation of other types of air conditioners

The installation of central air conditioners is also not easy, which for efficient operation requires the installation of a system of air ducts, communications, ventilation, equipment, as well as the connection of power supply cables. Only after installing all these elements, such a system will work stable and efficiently.

Separately, it should be made of the installation of multi-zone and VRV/VRF systems, which provides the installation of one outdoor and several indoor units.

Dismantling the air conditioner

Today, dismantling a split system is a service no less relevant than the installation itself. When is it required?

  1. You decided to replace the old air conditioner, which has served every conceivable time, and replace it with a modern inverter one;
  2. The occurrence of a malfunction that cannot be repaired. It is more expedient to buy a new air conditioner;
  3. It is planned to modernize the existing air conditioning system. Example: Several traditional split systems will be replaced with a modern VRV system.
Special conditions of cooperation

We are happy to jointly conduct projects with organizations and self-employed specialists, recommend you to our clients and help with the outsourced engineering part. Additionally, we invite you to attend seminars of the "Engineering in Design" series, where we show by examples how to correctly implement engineering systems in the interiors of end customers.

Become a partner
For interior designers
For architects
For foremen
For dealers

Our projects

The best proof of our professionalism - implemented customer objects

Ventilation, air conditioning and heating in the apartment, residential complex "Novopecherskie Lipki"

  • KITCHEN
  • DINNER ZONE
  • WARDROBE
  • LIVING ROOM
SUPPLY AND EXHAUST GENERAL VENTILATION SYSTEM MAICO Ws 320 KB

Air handling unit Malco WS 320 kV with heat recovery, designed to ensure proper air exchange in a residential or commercial space. In this device, the KB index indicates the presence of a built-in heater and a bypass.

KITCHEN MIXER MOONY

Single lever sink mixer with 28 mm swivel spout, double flow for clean water. The water is turned on and off by means of one chrome-plated lever. Refined design and durable materials will ensure the reliability of the mixer for many years.

DRIVE FOR AIR DAMPER BELIMO

Designed to control air dampers. It can be used in both ventilation and air conditioning systems. The drive has a protective function against frost or smoke.

SALDA SILENCERS SALDA

Silencers are used to reduce sound pressure in circular ventilation ducts. They provide quiet operation of the ventilation unit, they are mounted on each of the air inlets to the ventilation unit. In this case, 4 silencers are provided.

IN-FLOOR CONVECTOR KAMPMANN KATHERM QK

Heat convector Katrtan Katherm QK-high-quality equipment for space heating. It has a function of forced convection (built-in fan), which combines EC-technology of fans together with smooth regulation of its speed (KaControl control system). This solution allows you to increase energy efficiency to the maximum level. It also guarantees a quieter operation without discomfort for the occupants.

TROX CONCEALED LINEAR DIFFUSERS

Trox slot diffusers are used in residential and administrative premises, and are installed in suspended ceilings. The design includes guide vanes (by default - black, on order the color can be different), a plenum box with a branch pipe. These devices are used in supply and EXHAUST ventilation systems. Their advantage is the ability to accurately direct the air flow. Trox slot diffusers are made of high quality aluminum.

DUCT AIR CONDITIONER DAIKIN FDXM25 Daikin

FDXM25-duct-type indoor unit, designed for rooms up to 25 m2 The unit was placed in the ceiling space, making the room visually freer without unnecessary details and equipment. It can work for cooling, heating or dehumidification.

DESIGN RADIATOR ЈAGA STRADA

The Jaga Strada radiators are distinguished by their high thermal performance and stylish design: the heat exchanger maximizes heat production with minimal energy consumption, and the panels, in combination with the stylish grille, give the appliance an elegant look. They can be combined with condensing boilers, react quickly to changes in room temperature.

TROX CONCEALED LINEAR DIFFUSERS

Trox slot diffusers are used in residential and administrative premises, and are installed in suspended ceilings. The design includes guide vanes (by default - black, on order the color can be different), a plenum box with a branch pipe. These devices are used in supply and EXHAUST ventilation systems. Their advantage is the ability to accurately direct the air flow. Trox slot diffusers are made of high quality aluminum.

Ventilation, air conditioning and heating in the apartment, residential complex "Novopecherskie Lipki"

Engineering systems in the Alter Air office

  • MEETING ROOM
  • SHOWROOM
VENTILATION UNIT ЈАВLOTRON FUTURA L WITH COOL BREEZE MODULE

Jablotron Futura L is an innovative air handling unit that provides ventilation in a house, apartment or office. Provides fresh filtered air to the premises and removes exhaust air. It is autonomous and intelligent, integrates with the smart home system and is controlled by a mobile application. She herself notifies the owners of the need to replace filters or problems that have arisen. The Jablotron CoolBreeze module (white block on top of the unit) works in conjunction with the Jablotron Futura, cooling or heating the air depending on the season or personal preferences of the owners.

AIR-WATER HEAT PUMP VIESSMANN VITOCAL 100S

Viessmann Vitocal 100-S AWB-M 230V 101.A04 "air-to-water" heat pump is designed to provide heating and hot water supply. Consists of 2 separate blocks - internal (which is located in our office) and external (located on the outer wall of the building) .They are connected to each other by means of freon pipes. Through them the refrigerant (R410A) with a high temperature moves to the indoor unit, giving off heat to the system.

UPONOR DISTRIBUTION COMBO

UPONOR distributor manifolds are a Scandinavian approach to heating. They are an element of underfloor heating and contribute to high-quality and efficient heating of a house or apartment. They are produced for hot and cold water, can be interconnected and completely eliminate the risk of pipe breakage.

PUMP GROUP MEIBES

The Meibes pumping group is used to maintain the temperature and supply water in the heating system. Allows you to accurately control the coolant and adjust its parameters. It is distinguished by high reliability and stability of work, with its help it is easy to control the temperature of the coolant. It integrates into almost any modern heating system, is especially widely used in the "Warm floor" circuit.

PUMP GRUNDFOS UPS 25/6

The circulating pump Grundfos UPS 25/6 is small-sized and practically silent, it is distinguished by economical consumption of electricity. It is used for water circulation in heating systems, including floor heating systems, and hot water supply. The Grundfos UPS 25/6 pump is easy to connect and manually adjust.

UPONOR DISTRIBUTION COMBO

UPONOR distributor manifolds are a Scandinavian approach to heating. They are an element of underfloor heating and contribute to high-quality and efficient heating of a house or apartment. They are produced for hot and cold water, can be interconnected and completely eliminate the risk of pipe breakage.

VAV VALVES ABLOTRON VARIOBREEZE

The Jablotron VarioBreeze is a variable air VAV valve, one of the components of the VAV system. It is a control damper that adjusts the air flow in a particular room - from full air flow to shutting off the air flow. That is, it allows for zone ventilation with variable fresh air supply.

PUMP GROUP MEIBES

The Meibes pumping group is used to maintain the temperature and supply water in the heating system. Allows you to accurately control the coolant and adjust its parameters. It is distinguished by high reliability and stability of work, with its help it is easy to control the temperature of the coolant. It integrates into almost any modern heating system, is especially widely used in the "Warm floor" circuit.

COPPER PIPES OF THE HEATING SYSTEM

When organizing engineering systems, we make all piping of boiler rooms on copper. This material is not afraid of temperature changes, does not lend itself to the negative effects of ultraviolet rays and has a service life of 50 years, which is comparable to the service life of residential buildings. Copper pipes ensure the reliability and durability of the entire system.

EXPANSION TANK ZILMET CAL-PRO 35L

The Zimet CAL-PRO 35L expansion tank is designed to compensate for changes in the volume of water in the heating system. It prevents pressure drops and helps reduce energy consumption. Used in conjunction with boilers and pumps. Tanks of the Zilmet brand are distinguished by their high strength, wear resistance and anti-corrosion properties.

ACCUMULATING TANK DRAZICE UKV 102

Accumulating tank Drazice UKV 102 is designed to accumulate excess heat from the heat generator of the heating system (in our case, a heat pump). It is made of steel, the inner surface remains untreated. Covered with non-removable polyurethane insulation. we give preference to the Drazlce brand for the implementation of systems with heating elements.

SILENCER FOR AIR DUCTS

Silencers for ducts are necessary in order to reduce the noise level. This requirement is especially important in office premises. Silencers are installed in the ducts directly behind the ventilation unit and significantly reduce the noise level in the ventilation ducts. In our projects we use the highest quality sound attenuators of well-known brands, for example, Systemair.

Engineering systems in the Alter Air office

Videoreviews

Ventilation, air conditioning and heating systems in the interior design - Kiev, RC Novopecherskie Lipki
Ventilation, air conditioning and heating systems in the interior design - Kiev, RC Novopecherskie Lipki
JABLOTRON LIVING TECHNOLOGY - a new word in residential ventilation
JABLOTRON LIVING TECHNOLOGY - a new word in residential ventilation
Ventilation, heating and air dehumidification in a 70 m2 indoor pool, Gostomel
Ventilation, heating and air dehumidification in a 70 m2 indoor pool, Gostomel
Want to experience climate systems?

Leave a request and visit our showroom, where all engineering systems are installed and you can visually evaluate their work before ordering.

STAGES OF IMPLEMENTATION

We have built a process that guarantees the result
  • Consultation
  • Commercial offer
  • Design
  • Installation of systems
  • Service maintenance
01
Consultation

Consultation

The first meeting takes place in our showroom and lasts 1-1.5 hours. We discuss your wishes, features of the object and the profitability of a particular solution. We show how the equipment implemented in the office works - you will have a clear idea of the implemented engineering systems, their efficiency and ergonomics.

02
Commercial offer

Commercial offer

You receive a feasibility study and a commercial offer based on it. It also includes an estimate for the equipment and strapping - you will have the right idea of the budget right from the start. The final cost after drawing up the project can change within 15% up or down.

03
Design

Design

After agreeing on the commercial offer, the client makes 10% of the advance payment of the total amount. We start designing engineering systems. The developed project is agreed with the client, if necessary, corrections are made. The project is then approved by both parties in writing. You will receive a complete package of project documents.

04
Installation of systems

Installation of systems

We deliver and install all the necessary equipment. We effectively integrate it with other systems and interior solutions. We carry out commissioning works. The final launch of the engineering system is carried out in the presence of you and the chief engineer, so that you are convinced of the correct operation of all components.

05
Service maintenance

Service maintenance

We carry out warranty and post-warranty maintenance of engineering systems - during the entire period of their operation. We clean and replace filters and accessories. At the request of the client, we can modify the system or optimize it in order to change the performance or save resources.

Installation cost

Air conditioning installation cost in "Alter Air"

The cost of installation depends on work required; for understanding, we give prices for the installation of individual equipment and components of the air conditioning system. The general estimate`s formed individually for each project

For the cost installation standard, see each type separately

Wall-mounted indoor unit installation
1 PC.
from 480 hrn.
Duct-type indoor unit installation
1 PC.
from 844 hrn.
Installation of the outdoor block of the split system
1 PC.
from 645 hrn.
Installation of the outdoor block of a multi-split system
1 PC.
from 2 040 hrn.
Any questions left?

Quick consultation from our engineer

Summing up

As mentioned above, an air conditioning system at home (or an apartment, office, shop or other room) will last a long time only with the correct selection of equipment, competent design and professional installation of the entire system.

The installation of air conditioners provides the preliminary departure of specialists to the site, because in order to correctly select and determine the cost of work, they need to take into account the main parameters and characteristics of the premises, such as:

  •     calculation of the amount of heat depending on the area of ​​the room, which must be extinguished by the air conditioner;
  •     selection of the optimal placement of the air conditioner - so that it does not create a draft, and unnecessary noise does not interfere with the living and work of people;
  •     drawing up an assignment for installers who, in accordance with it, will mount the air conditioner.

You can entrust all these stages to the qualified specialists of the Alter Air company, because they have extensive experience in this industry, therefore they will cope with the tasks of any complexity by 100%. If you need to buy air conditioners with the cheap installation, but at the same time of high quality - you are in Alter Air!


ABOUT COMPANY
Do you want to create a healthy and favorable climate in your home?
You have come to the right place!

We solve the problem of microclimate in a house, starting from ventilation, air conditioning, heating and ending with humidification and air purification. We make sure that all systems interact productively with each other and at the same time do not consume a lot of energy in order to save your costs. In our work, we are like a family doctor - we treat your home, analyze a problem, offer solutions to it, and not just sell pills like a pharmacist in a pharmacy.

More about company

500 useful reviews
2 000 satisfied customers
10 000 items in the store
2 300 commissioned objects

MOUNTING MATERIALS WE USE

A properly organized climate system is a guarantee of comfort.

In order for it to work as efficiently and smoothly as possible, you need to carefully approach not only the issue of its design, but also installation, including the choice of installation materials.

Heat insulator
Heat insulator

Rubber insulation (19 mm) Flexifoam - for external ducts or polypropylene insulation (8 mm) Airfoam - for internal ducts.

Diffusers and grilles
Diffusers and grilles

Air distribution grilles and slot diffusers from TROX and Madel LOOK provide the most comfortable air flow and aesthetic integration into the interior.

Galvanized steel air ducts
Galvanized steel air ducts

Own production of products from galvanized steel allows you to obtain air ducts of the required shape for high-quality implementation of any project.

Order a ventilation system project

Take care of your family's health and comfort

Testimonials and questions
No testimonials yet